Page 10 of 10 FirstFirst ... 8910
Results 91 to 94 of 94

Thread: 2019 Trap Line and Outdoor Pursuits

  1. #91
    Join Date
    Mar 2010
    Location
    In the Oak Hickory plain.
    Posts
    4,984

    Default

    Despite having those two toms walking the area I’m in I never got out turkey hunting. Opening morning I heard a close by shot and didn’t see those birds again.

    I’ve been head deep in wrench turning. Replaced both cylinder heads on the gm 6.2. Replaced brake and fuel lines, installed the rear ends out of the crashed truck, and stripped the interior.

    I ordered a driveshaft for the Ford earlier in the week. That wasn’t cheap!

    Removed the windshield from the F350 to repair rust around the windshield and fix a leaking windshield problem. Weak areas were cut out and replaced with patches. Patches were created from a fender of the crashed truck. Some plastic filler was laid over the welded patches, along with a few coats of primer and spot putty. A few coats of left over black acrylic enamel from the 87 project were laid over the primer.

    Next will be a professional windshield installation.

    I’m praying the fur prices increase for the coming season.

    C9BCA64A-1BED-4DF8-88A3-D868131B7218.jpeg

    3C05FC3D-8AD4-4995-B74F-FDADE88FE39F.jpeg
    Leave my rifle, my fishing pole, my traps, and leave me be.

  2. #92
    Join Date
    Sep 2009
    Location
    NH
    Posts
    3,361

    Default

    Nice work on the truck. You seeing many turkey poults over your way?

  3. #93
    Join Date
    Mar 2010
    Location
    In the Oak Hickory plain.
    Posts
    4,984

    Default

    Quote Originally Posted by NH Mountains View Post
    Nice work on the truck. You seeing many turkey poults over your way?
    I haven’t seen any polts. Though I haven’t seen many adult turkeys either which makes me suspect their on nest.
    Leave my rifle, my fishing pole, my traps, and leave me be.

  4. #94
    Join Date
    Mar 2010
    Location
    In the Oak Hickory plain.
    Posts
    4,984

    Default Heavy Iron Creativity

    Iíve been searching for a gooseneck hitch for a cab & chassis frame and learned no company makes a bolt on application. There where some manufacturers in the past but they discontinued the hitch. All hitches now require modification of factory bases or building a base.

    I picked up a 10Ē steel beam along with my concrete saw and turned a scrap piece of steel into a base! A 1/2 gallon of gas, a old cut off saw, ear muffs, and determination made for an acceptable product.
    Attached Images Attached Images
    Leave my rifle, my fishing pole, my traps, and leave me be.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •